Ademco vista install manual

specifications for False Alarm Reduction. The VISTAiP is not certified as SIA-compliant, but can be programmed for False Alarm Reduction. To program for False Alarm Reduction, follow the SIA Guidelines noted in the applicable programming fields. NOTE: Throughout this manual, device model numbers are ADEMCO model numbers unless otherwise noted.  · A VISTAP/VISTAPUL Installation and Setup Guide For Systems without Line Security. • • You must use the VISTAP/VISTAPUL’ dialer with a i-ent Communicator. Connect the control’s burglary/audible panic alarm trigger (on J7 header) and the EN’s phone line monitor output to the i-ent Communicator. N 5/98 VISTAFB Commercial Fire Burglary Partitioned Security System with Scheduling Installation and Setup Guide Features Q.E.D. programming.

-- VISTAP = up to 16 relays/devices plus two on-board triggers-- VISTAP = up to 8 relays/devices plus two on-board triggers)-- Use any combination of , and or Powerline Carrier Devices Output functions (up to 48) • Ademco / Phone Module (Part. 1 only); provides access to the system via on premises or. NOTE: The features and procedures described in this manual apply to the ADEMCO VISTAP and VISTAPSIA (herein referred to as the VISTAP series) and ADEMCO VISTAP Series security systems. Differences are noted where applicable. System Basics Burglary Protection. specifications for False Alarm Reduction. The VISTAiP is not certified as SIA-compliant, but can be programmed for False Alarm Reduction. To program for False Alarm Reduction, follow the SIA Guidelines noted in the applicable programming fields. NOTE: Throughout this manual, device model numbers are ADEMCO model numbers unless otherwise noted.

Refer to the User Setup chart at the back of this manual to keep a record of user programming. NOTE: Partition Master codes apply only to those user numbers. Congratulations on your ownership of an ADEMCO Security System. your installer if Exit Alarm is active for your system. Exit Alarm Active. Supervised by control panel (if supported). ULC For ULC installations, the VISTABP/VISTABP. Series must be used with the ADEMCO keypad.